膨胀机主轴缝隙腐蚀的电化学分析

为探究膨胀机主轴的缝隙腐蚀行为,搭建了模拟缝隙腐蚀实验装置。通过电化学测试,确定了不同缝隙位置处的自腐蚀电位随时间的变化规律,并揭示了缝隙内腐蚀反应的发展过程。结果表明:缝隙内腐蚀反应经历双电层形成-氧浓差电池形成-金属水解三个反应过程。在富氧条件下,腐蚀产物的主要成分为Fe(OH)2。随着氧气的耗尽,氧浓差电池形成,腐蚀产物逐渐向FeOOH和Fe3O4转变。     

Recent advancement and prospective of waste plastics as biodiesel additives: A review

Recently, commodity plastics have been shown to be a promising additive to improve the fuel properties of biodiesel, which offers a promising solution to the plastic pandemic. As many environmental and societal issues arise from plastic pollution, repurposing technologies are paramount in order to meet Sustainable Development Goals (SDG). A potentially cost-effective approach can be achieved by using waste plastics as biodiesel additives – resonating to the expression ‘to kill two birds with one stone’. However, given the novelty of such investigation, current optimization studies show varying results on the ideal plastic-to-biodiesel ratio as well as the reaction parameters. The difficulty in determining the exact optimum values is due to the many variations of biodiesel properties and the complex behaviour of plastic polymers, which are seldom discussed in review papers. Hence, to address the literature gap, this paper offers the necessary fundamentals of biodiesel and plastic dissolution; facilitating future researches to advance the application of plastics as viable biodiesel additives. Accordingly, the topics covered include the fuel and solvent properties of biodiesel related to its' composition, as well as the polymer dissolution phenomena. Finally, as the focal aim of the paper, a synopsis on the recent advancement of plastic-added biodiesel is presented; in particular, those that are related to the blend characteristics, fuel properties, combustion quality, and environmental impact.     

基于萤石溶解/表面转化的含钙矿物表面定向调控浮选技术及机理研究

研究了萤石在白钨矿和方解石表面溶解和转化的可能性, 发现萤石可以在特定的捕收剂体系下作为抑制剂实现含钙矿物的浮选分离。浮选实验结果表明, 萤石作为抑制剂, 在白钨矿和方解石的浮选中, 用量小、作用效果明显; 动电位检测结果证实了萤石能明显降低方解石的动电位, 但对白钨矿基本没有影响; XPS检测结果证明了萤石对方解石的作用主要在于对Ca-O键能的减弱和Ca-F基团的生成, 即在方解石表面生成CaF2膜; AFM检测则可直观观察到方解石表面经过萤石处理之后出现明显的起伏, 印证了离子的侵蚀与CaF₂膜的生成。     

镍钴电池Co-S负极材料的电化学特性研究

通过水热法制备Co-S材料,结合XRD分析其相结构,SEM和EDS分析其表面形貌及元素种类,采用充放电测试、循环伏安和交流阻抗法对其进行电化学特性研究。结果表明,该合金仅含有Co3S4、Co9S8和Co(OH)2, 结晶性良好,呈交叉生长的纳米薄片状,放电电流密度为150 mA/g时的最大放电容量为393.1mAh/g,50次循环后的容量保持率高达80.6%。当放电电流密度为1200 mA/g时,该电极的高倍率放电性能为79.3%。通过循环伏安和交流阻抗分析可知Co-S电极主要发生Co/Co(OH)2的法拉第反应,不可逆产物CoOOH的生成降低了活性物质的利用率,导致放电容量衰减。     

P2O5对炼钢炉渣中石灰溶解过程的影响

在1400℃下，将平均尺寸φ15 mm?10 mm的石灰块投入CaO?SiO2?FeO及CaO?SiO2?FeO?P2O5两组渣系中，研究了静态条件下石灰在两组渣系中的溶解行为。结果表明，两组渣系在反应界面周围形成四个区域，即基体渣层、C2S渗透层、铁酸钙渗透层和石灰层。渗透层为石灰中的Ca2+与液渣中的Fe2+相互渗透所形成的一个多相共存区域，存在致密固相层影响石灰的溶解。渗透层中的铁酸钙层逐渐被C2S层取代，C2S层厚度不断增加最终溶解于液相渣中。5~60 s两组渣系石灰溶解速度相近，60~80 s含磷渣系石灰溶解速度显著加快。当渣中加入P2O5时，磷会固溶于C2S中形成C2S?C3P固溶体层，该层的形成会排挤FeO进入渣中，提高渣的渗透能力，加速石灰溶解。     

Electrochemical corrosion behavior of LDX 2101® duplex stainless steel in a fluoride-containing environment

The effect of fluoride on the electrochemical corrosion behavior of an LDX 2101® duplex stainless steel (DSS) was studied. Open-circuit potential (E_OC) and electrochemical impedance spectroscopy (EIS) measurements were carried out in artificial saliva and with the addition of fluoride (1 wt% NaF). The electrochemical corrosion behavior of the AISI 316L austenitic stainless steel (SS) was also evaluated for comparison. Both open-circuit potential and EIS results indicate that DSS and austenitic SS undergo spontaneous passivation due to spontaneously formed oxide film passivating the metallic surface, in the simulated aggressive environments. However, LDX 2101® exhibits superior corrosion resistance as compared with AISI 316L, and this improvement is ascribed to the formation of a passive film which shows a higher protective effect than the one formed on AISI 316L.     

Optical spectroscopic and electrochemical characterization of oxide films on a ferritic stainless steel

Colored oxide films that form on ferritic stainless steel in a high-temperature, oxidizing environment and correspond to different chemical compositions can cause a deterioration of pitting resistance and corrosion performance. Herein, optical spectroscopic and electrochemical techniques have been used to reveal the relationship between color, chemical composition, and corrosion resistance of oxide films formed in the temperature range from 400°C to 800°C for 30 min and at 800°C for 10, 20, 30, and 60 min. The substrate with a thin and dense passivation film leads to a low pitting potential but high corrosion resistance. Oxide films of yellowish or brownish color formed below 600°C are mainly iron oxides, which correspond to low corrosion resistance. No passivation characteristics can be observed for polarization curves of oxide films formed at 500°C and 600°C. The color of oxide films varies from blue to dark gray with the increase of oxidation time at 800°C. Corrosion resistance changes with different proportions of Fe₃O₄, Cr₂O₃, and FeCr₂O₄. The gray oxide films formed at 800°C for 30 min exhibit the lowest pitting susceptibility and the highest corrosion resistance.     

汽爆秸秆对磷矿粉溶解作用及其溶解残渣对小麦生长的影响

为探究生物质对磷矿粉的溶解作用，以玉米秸秆为原料，利用蒸汽爆破（汽爆）技术释放有机酸，在高温水热条件下溶解磷矿粉并制备含磷腐殖酸。通过实验对汽爆秸秆溶解磷矿粉工艺进行了探究及优化，并利用傅里叶红外光谱（FT-IR）、扫描电子显微镜（SEM）和X射线荧光光谱（XRF）进行分析和表征。研究结果表明：15 g汽爆秸秆与1 g磷矿粉以及75 mL水在170℃、加入10% CaCl₂的条件下，反应3 h的溶磷量为1.46 mg/g（以秸秆质量计，下同）。加入与磷矿粉相同质量的NaHSO₄后可使体系pH值降低至2，pH值的降低是磷溶出的关键因素，溶磷量提高为13.10 mg/g。溶磷后的秸秆制备腐殖酸作为小麦盆栽肥料，用量0.2%时，小麦株高、根长、叶绿素含量和相对电导率均显著高于空白组。     

航天发动机叶片电解加工流场设计和试验研究

电解加工作为整体构件制造的主要技术之一,其流场设计的合理性将严重影响电解加工过程的稳定性、加工效率和质量。针对航天发动机叶片式扩压器设计了部分阻隔式反W型流场,并开展了与侧流式和反W型流场的仿真比较。仿真结果表明,该流场方式可以保证加工区电解液的高速流动,并能有效避免进/排气边漏液现象。最后,在部分阻隔式反W型流场中开展了叶片式扩压器电解加工试验,在阴极进给速度为0.5 mm/min时加工出了扩压器叶片,验证了流场设计的合理性。     

超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响

目的研究超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响,探讨N80碳钢在超临界CO2环境中的腐蚀机制。方法利用高压釜进行失重和电化学测试,同时利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)进行腐蚀形貌观察和腐蚀产物成分分析。结果当温度为40℃时,腐蚀速率最小,电化学阻抗随时间延长持续减小,此条件下并没形成FeCO3保护膜。升高温度导致腐蚀初期的腐蚀速率明显增大,然而腐蚀某个时刻后,电化学阻抗突然增大,意味着FeCO3保护膜的形成。温度越高,腐蚀24 h后的阻抗越大,产物膜越致密,保护性越好。另外,腐蚀失重速率随流速的增加而增大,电化学测试也表明流速越大,阻抗越小,腐蚀电流密度越大。SEM形貌分析表明,流体流动破坏了FeCO3膜的致密度,降低了其对N80碳钢基体的保护作用。结论尽管升高温度加速了N80碳钢的腐蚀,但却有利于保护性FeCO3膜的形成。温度越高,FeCO3膜越致密。流体流动破坏了保护性FeCO3膜的致密性,加速了N80碳钢腐蚀。